Three phase Commutator Fusing Machine motor armature hot staking and spot welding machine
Quick Detail:
1. Model No.: ND-LWD-100PSJ
2. Armature Commutator OD ranges from15~40mm
3. This machine is controlled by PLC.
4. It has colorful touch screen, and data setting can be done on the touch sreeen.
5. It can weld both riser and hook type commutators.
Description:
This machine is applied to DC motor and universal motor. It is controlled by PCL, all the data setting can be done on the touch sreeen. It can weld both riser and hook type commutators. There are four power control method, namely secondary constant current, secondary constant voltage secondary constant frequency. This machine can automatically fuse, and operator only need to load and unload rotor.
Application:
This machine is applied to DC motor and universal motor. It can weld both riser and hook type commutators.
Specification:
1. Feeding method: automatic feeding. Loading and unloading
2. Parameter setting: touch screen and power parameter setting
3. Power control method: current feedback, high precision countercurrent
4. Commutator type: both hook type and raise type
5. Wire diameter: 0.1mm-1.2mm
6 Armature OD. φ10mm-φ50mm
7. Shaft OD: φ5mm-φ15mm
8. Commutator O.D.: φ15mm-φ40mm
9. Commutator slot/hook number: ≤36
10. current range: 0.5-50KA
11. Voltage range: 0.1-9.99V
12. Power range: 1.00-99.99KW
13. Power control method: secondary constant current, secondary constant voltage secondary constant frequency
14. Welding standard parameter range(1-63groups)
15. Electric parameter testing setting range: current: 00.00-99.99KA(0.01KA per unit), voltage: 00.00- 99.99V(0.01V per unit), Frequency: 00.00-99.99KW(0.01KW per unit)
16. Cooling method: water cooling
17. Air source: 4kg/cm2—6kg/cm2
18. Power supply: three phase AC380V±10% 50HZ 40KW
19. Machine weight: 800kg
Competitive advantages:
This machine is easy for operation. It’s helpful for customer to reduce labor cost and improve production efficiency.
Your message must be between 20-3,000 characters!
