Electrical Insulation Materials High Voltage Insulator Motor Part 6630 DMD

Introduction

The insulation paper material is a three-layer soft composite insulating material composed of two outer layers of polyester non-woven fabric and a middle layer of polyester film. The insulation rating is Class B 130 °C. It combines the good impregnation properties of non-woven fabrics with the good dielectric strength of polyester films, and is widely used in electrical equipment.

Application

The resin can be absorbed during the impregnation.

Uniform surface, no fluffing, and no bubbles, pinholes, wrinkles and defects, suitable for mechanical off-line processes. The sizing insulation of Y series motors is used for inter-slot insulation, inter-turn insulation and interlayer insulation of small and medium-sized low-voltage motors, gasket insulation or as interlayer insulation in transformers.

Features

High tensile and heat resistance

With good mechanical properties, dielectric properties, and electrical properties, polyester non-woven fabrics have good adsorption capacity and can absorb resins during impregnation.

Uniform surface, no fluffing, and no bubbles, pinholes, wrinkles and defects.

Parameter

Package

Inner packaging: polyethylene film

Outer packaging: carton or woven bag

Storage conditions

Can be stored indefinitely under normal conditions (20°C, 50% r.h.)

DMD 6630 Insulation Material picture show

We also supply different types of electrical insulation materials for stator or armatures, such as insulation paper and insulation wedge with different class degree. DMD Class B/F, DM Class B/F, Polyester film Class E, Red Vulcanized Fiber Class A, NH& NHN, etc