Big Power Coil Forming Machines Low Noise Coil Forming Equipment

Big Power Coil Forming Machines Low Noise Coil Forming Equipment

(1) Machine mainfunction and characteristic
This stator coil forming machine is suitable for big power stator, long stack length stator(deep-well pump stator) or other big dimension stator. It is horizontal type with a auto slider. Stator can be moved by lifting device. Tooling adopts flexible principles of inner expansion, outer wrapping and edge forming. It is controlled by PLC. The parameter can be set in the HMI.

(2) Main technical data

(3) Application
This forming machine is applied to deep water pump motor and other various type of big dimension stator. 

(4) Caution

1. This machine can not disassemble optionally.
2. If coil dimension and appearance is inaccurate, stop to do adjustment to avoid quality accident.
3. The machine should be stopped or power off when the operator is away or do clean and lubricating job.
4. The safety device can not be removed in the process of using.
5. The dress of operator should meet the safety requirements, stand in proper position.
6. Regularly clean the lubricating tooling and lubricating system. Do not keep the safety door and oil eye lid to avoid of that foreign matter like dust, metal scrap get in.
7. Do not operate the machine if there is a warning sign “Operation prohibited” on the machine until alert relieved.
8. Do not operate the machine when it is under maintenance. Stop the mechanical operation and cut off the power.
9. Operator should not touch electrical parts by wet hands, which may cause electric shock.
10. The operator can not leave away when the machine is running, should keep eyes on that if any abnormality(abnormal noise, unusual smell, over heat, vibration) of each parts coming up. Stop and check the machine immediately if any of above mentioned takes place, and solve it in time.
11. It is prohibited that to use the machine beyond its capacity and load.
12. After stop using the machine, please check and clean up, please do not use the steam, water or corrosive liquid to clean the machine.

Stator forming Machine forming process